Sharp MX-3100N - Manual (Page 681)

7-35
SYSTEM SETTINGS
Contents
Image Send Settings
Item Factory default setting Page
■ Image Send Settings
7-73
●
Operation Settings 7-73
X Other Settings 7-73
‹ Default Display Settings Scan (fax when fax is installed)
7-73
• Hold settings for a while after scanning has been
completed
Disabled
• Switch Automatically to Copy Mode Screen Enabled
‹ Address Book Default Selection Tab Switch: ABC, Address Type: All 7-73
‹ Initial Resolution Setting
7-73
• Scan Apply the Resolution Set when
Stored: Disabled
200 X 200 dpi
• Internet Fax* 1 Apply the Resolution Set when
Stored: Disabled
200 X 100 dpi
• Fax* 2 Apply the Resolution Set when
Stored: Disabled
Standard
‹ Default Exposure Settings Auto
7-73 • Original Image Type Text
• Moiré Reduction Disabled
‹ Must Input Next Address Key at Broadcast Setting Disabled 7-74
‹ Scan Complete Sound Setting Middle 7-74
‹ The Number of File Name/Subject/Body Keys Displayed
Setting 12
7-74
‹ The Number of Direct Address Keys Displayed Setting 10 7-74
‹ Disable Switching of Display Order Disabled 7-74
‹ Hold Setting for Received Data Print Disabled 7-74
‹ Default Verification Stamp Disabled 7-74
‹ Erase Width Adjustment
7-74 • Edge Clearance Width 1/2"
• Center Clearance Width 1/2"