Sharp MX-3100N User Manual
Page 668
7-22
*1 When a saddle stitch finisher or finisher is installed.
*2 This setting is used to adjust the line width of vector graphics (black & white printing only). Except for CAD and other
specialized uses, there is normally no need to change this setting. Information on the selections is shown in
"
Selections for the line thickness setting
" (page 7-22).
*3 Paper sizes that can be used with this function are A3, B4, A4, 11" x 17", 8-1/2" x 14", and 8-1/2" x 11". (This function
may not take effect with some print methods.)
*4 Only effective when printing PDF, JPEG, and TIFF files.
Selections for the line thickness setting
* All lines are the minimum line width.
PCL Settings
This is used to set the symbol sets, fonts, and line feed code used in a PCL environment.
Settings
Output
•
(Use Print per Unit)
•
(Do not use Print per Unit)
• Staple Position*
1
: None, 1 Staple at Back, 2 Staples, 2 Staples (Top)
•
(Use Punch)
•
(Do not use Punch)
Quick File
•
(Disabled)
•
(Enabled)
Selection
0
1
2
3
4
5
6
7
8
9
Percentage
Minimum
line width*
50%
75%
90%
95%
100%
105%
110%
125%
150%
Item
Description
Selections
PCL Symbol Set Setting
Specify the symbol set used for
printing.
Select from 35 items.
PCL Font Setting
Use this to select the font used for
printing.
• Internal Font
• Extended Font
(List of internal fonts when extended fonts are not
installed.)
PCL Line Feed Code
This setting is used to select how
the printer responds when a line
feed command is received.
• 0.CR=CR; LF=LF; FF=FF
• 1.CR=CR+LF; LF=LF;FF=FF
• 2.CR=CR; LF=CR+LF; FF=CR+FF
• 3.CR=CR+LF; LF=CR+LF; FF=CR+FF
Wide A4
When this is enabled, 80
characters per line can be printed
on A4 size paper using a 10-pitch
font. (When this setting is
disabled, up to 78 characters can
be printed per line.)
•
(Enabled)
•
(Disabled)
Item
Selections