Sharp MX-3100N User Manual

Page 396

Advertising
background image

4-55

FACSIMILE

Contents

CHANGING THE RESOLUTION

The resolution can be selected to match the characteristics of the original, such as text or photo, the size of the text, and
the darkness of the image.
Refer the following tables to select appropriate settings.

Resolution settings

Resolution

When to select

Standard

Select this setting when your original consists of normal-sized text (like the text in this manual).

Fine

Select this setting when your original has small text or diagrams with fine lines.
The original will be scanned at twice the resolution of the [Standard] setting.

Super Fine

Select this setting when your original has intricate pictures or diagrams.
A higher-quality image will be produced than with the [Fine] setting.

Ultra Fine

Select this setting when your original has intricate pictures or diagrams.
This setting gives the best image quality. However, transmission will take longer than with the
other settings.

Half Tone

Select this setting when your original is a photograph or has gradations of color (such as a
color original).
This setting will produce a clearer image than [Fine], [Super Fine], or [Ultra Fine] used alone.
Halftone cannot be selected when [Standard] is used.

1

Touch the [Resolution] key.

The current resolution setting appears to the right of the [Resolution] key.

IMAGE SETTINGS

(page 4-45)

2

Select the resolution.

(1) Touch the key of the desired resolution.

(2) Touch the [OK] key.

When [Fine], [Super Fine], or [Ultra Fine] is selected, the [Half Tone] key can be touched to select halftone.

• When using the document glass to scan multiple original pages, the resolution setting can be changed each time you change pages.

When using the automatic document feeder, the resolution setting cannot be changed once scanning has begun. (However, when
"Job Build" in the special modes is used, the resolution can be changed each time a new set of originals is inserted.)

• When a fax is sent at [Ultra Fine], [Super Fine], or [Fine] resolution, a lower resolution will be used if the receiving machine

does not have that resolution.

System Settings (Administrator): Initial Resolution Setting
This is used to change the default resolution setting.

Fax/Resolution

OK

Standard

Super Fine

Half Tone

Fine

Ultra Fine

(1)

(2)

Advertising
This manual is related to the following products: