Sun Microsystems SUN FIRE X2100 User Manual
Page 18
Advertising
1-8 Sun Fire X2100 Server Getting Started Guide
• April
2006
4. From the front of the rack, set the proper width of the rails with spacer. (See
.)
FIGURE
1-5
Setting the Rail Width
5. Tighten the screws on the brackets.
6. Remove the spacer and confirm that the rails are attached tightly to the rack.
7. Repeat
for rear of the rack.
8. If available, extend the anti-tip foot at the bottom of the rack. (See
Caution –
If your rack does not have an anti-tip foot, there is some danger of the
rack tipping.
Advertising