A.1.1, Appendix, Drivers – Sun Microsystems SUN FIRE X2100 User Manual
Page 66
A-2 Sun Ultra 20 Workstation Getting Started Guide
• April
2006
A.1
Creating a RIS Image of Windows 2003
Server 32-bit and Platform Drivers
This section tells you how to create a Windows 2003 Server 32-bit image on a RIS
server and then add platform specific drivers to the image. The following sections
apply to both the Standard and Enterprise editions. All drivers for this procedure are
located on the Supplemental CD, version 1.3 or later.
Note –
Before using this procedure, you must install the RIS onto a Windows 2003
server. See the following URL for complete instructions on how to install the RIS.
A.1.1
Creating the Windows 2003 Server 32-bit Image
on the RIS Server
To copy Windows 2003 Server onto the RIS server, do the following steps. Click Next
or Finished in each screen to advance to the next screen.
1. Insert the Windows 2003 Server 32-bit CD into the RIS server's CDROM drive.
2. In the Start menu, select Run.
3. To start the RIS setup program, type the following command:
Note –
In all commands, c:\ is shown as the DOS command prompt.
4. In the “Welcome to the Remote Installation Services Setup Wizard“ screen, click
Next.
5. In the “Remote Installation Services Options“ screen, choose “Add a new OS
image to this remote installation server“.
6. In the Installation Source Files Location screen, choose the CDROM drive with
the Windows 2003 Server 32-bit CD.
c:\ risetup.exe