Sun Microsystems SUN FIRE X2100 - Manual (Page 55)

Chapter 2 Software Installation 2-21
iii. Click on Device Manager.
e. Right click on any drivers that have an exclamation point on them and select
Update Driver.
f. Proceed through the Update Driver screens.
Specify the driver location as C:\NVIDIA\Ethernet.
3. Install the Broadcom Ethernet drivers:
a. Change to the directory on the Supplemental CD by typing the following
command at a DOS prompt:
Where OS is 2003_32 or 2003_64.
b. Copy the .zip file in this directory to C:\Broadcom
c. Unzip the file.
d. Open the Windows Device Manager as follows:
i. Click on the Start button.
ii. Right click on the My Computer menu item, and select Message from the
drop down menu.
iii. Click on Device Manager.
e. Right click on any drivers that have an exclamation point on them and select
Update Driver.
f. Proceed through the Update Driver screens.
Specify the driver location as C:\Broadcom\subdirectory, where subdirectory is
the only subdirectory present.
4. Reboot the server.
C:\> D:
D:\> cd \DRIVERS\WINDOWS\ OS\NIC