A.2.1, Appendix, Drivers – Sun Microsystems SUN FIRE X2100 User Manual
Page 72
A-8 Sun Ultra 20 Workstation Getting Started Guide
• April
2006
A.2
Creating a RIS Image of Windows 2003
Server, 64-bit, and Platform Drivers
This section tells you how to create a Windows 2003 Server 64-bit image on a RIS
server and then add platform specific drivers to the image. All drivers for this
procedure located on the Supplemental CD, version 1.3 or later.
Note –
Before using this procedure, you must install RIS onto a Windows 2003
server. See the following URL for complete instructions on how to install the RIS.
A.2.1
Installing Windows 2003 Server 64-bit onto the
RIS Server
To copy the Windows 2003 Server 64-bit CD onto the RIS server, do the following
steps. Click Next or Finished in each screen to advance to the next screen.
1. Insert the Windows 2003 Server 64-bit CD into the RIS server's CDROM drive.
2. In the Start menu, select Run.
3. To start the RIS setup program, type the following command:
Note –
In all commands, c:\ is shown as the DOS command prompt.
4. In the “Welcome to the Remote Installation Services Setup Wizard“ screen, click
Next.
5. In the “Remote Installation Services Options“ screen, choose “Add a new OS
image to this remote installation server“.
6. In the “Installation Source Files Location” screen, choose the CDROM drive with
the Windows 2003 Server 64-bit CD.
c:\
risetup.exe