Sun Microsystems SUN FIRE X2100 - Manual (Page 21)

Chapter 1 System Setup 1-11
1.4.5 Installing the Cable Management Assembly
Use this procedure to install an optional cable management assembly (CMA).
1. Unpack the CMA parts.
2. Take the CMA to the back of the equipment rack and ensure that you have
adequate room to work around the back of the server.
Note – References to “left” or “right” in this procedure assume that you are facing
the back of the equipment rack.
3. Locate the CMA rail extension and insert it into the left slide-rail until the
extension locks into place with an audible click. (See FIGURE 1-8 .)
The CMA rail extension might be taped to the CMA assembly.
FIGURE 1-8 Inserting the CMA Rail Extension Into the Back of the Left Slide-Rail
CMA rail
extension
Left slide-rail