Sun Microsystems SUN FIRE X2100 - Manual (Page 51)

Chapter 2 Software Installation 2-17
5. Install the Ethernet and chipset drivers as shown in “Installing Windows 2003
Drivers” on page 20 .
Note – The Supplemental CD does not mount the diagnostic partition for Windows
2003.
Installing RAID Drivers Using the 2003Reburn Script
The Sun Fire X2100 Server Supplemental CD (705-1364) contains a script that allows
you to create a new Windows 2003 CD with the necessary RAID drivers. After
creating the new CD, you can boot it and install Windows 2003 normally. This new
CD automatically installs the drivers, making it unnecessary to use a USB diskette
drive and to install the NVRAID drivers.
For specific and current information on the 2003Reburn script, see the description
at the top of the script. If you have version 1.3 of the Supplemental CD, the script is
in the
/utilities/reburn directory. On earlier versions of the Supplemental
CD, the script was in the /utilities/reburn directory.
To install Windows 2003 using a RAID configuration, you need the following:
■ A system running Solaris Operating System for x86 Platforms, Solaris Operating
System (SPARC® Platform Edition), Red Hat Enterprise Linux 3 or 4, or SUSE
Linux Enterprise System (SLES) 9
■ Access to a CD burner
■ A blank CD-R or CD-RW
■ A Windows 2003 CD (retail media only—not an OEM version)
■ An Sun Fire X2100 Server Supplemental CD
To create a Windows 2003 CD with the Sun Fire X2100 Server drivers:
1. On a Solaris x86, Solaris OS (SPARC Platform Edition), Red Hat Enterprise Linux
3 or 4, or SLES 9 system, insert the Sun Fire X2100 Server Supplemental CD into a
CD or DVD drive.
2. As superuser, create a temporary directory with at least 1.2 GB of space.
For example:
# mkdir /files