Sun Microsystems SUN FIRE X2100 - Manual (Page 46)

2-12 Sun Fire X2100 Server Getting Started Guide • April 2006
3. Type the appropriate command to install the drivers:
■
For a Red Hat Linux system:
■
For a SUSE system:
If the drivers do not install properly, you have two other alternatives:
■ Install the drivers using a CD-ROM connected to the USB port.
■
If you are running a Red Hat Linux operating system, the drivers included
with the OS might work. Sun does not support open source drivers.
Install the Drivers on a Target Windows System
Note – Read the instructions in Section FIGURE 2-1, “Installation Flow Diagram” on
page 2-3 before following this procedure. You might need to install additional
drivers on your system before installing the chipset and display drivers.
If you plan to only install the Windows chipset and display drivers, follow this
procedure.
1. Browse to \\ hostname\drivers\windows to get the drivers.
2. Install the drivers through the Device Manager.
# /net/ hostname/drivers/linux/red_hat/install.sh
# /net/ hostname/drivers/linux/suse/install.sh