Sun Microsystems SUN FIRE X2100 - Manual (Page 29)

Chapter 1 System Setup 1-19
1.5.1 Interconnecting Servers
FIGURE 1-15 shows how to connect multiple servers using the platform Ethernet
(LAN) connectors.
If the service processor is installed, only LAN-1 can be used for the network
interface. LAN-2 must be used for remote server management if you have the
optional service processor (SP) card installed.
FIGURE 1-15 Interconnecting Servers
Server
= Ethernet (LAN)
Server
Server
Internet
Exter
nal LANs
LAN-2
LAN-2
LAN-2
LAN-1
LAN-1
LAN-1
connectors