SUPER MICRO Computer SUPERSERVER 6015T-INF - Manual (Page 103)

Appendix C: Intel HostRAID Setup Guidelines
C-3
Using the Intel ESB2 SATA RAID Utility Program
1. Creating, Deleting and Resetting RAID Volumes:
a. After the system exits from the BIOS Setup Utility, the system will automatically
reboot. The following screen appears after Power-On Self Test.
b. When you see the above screen, press the <Ctrl> and the <I> keys simultane-
ously to have the main menu of the SATA RAID Utility appear:
Note: All graphics and screen shots shown in the manual are for reference only. The
screen shots shown in the manual do not imply Supernicro's endorsement or non-
endorsement on any 3rd party's product. Your screens may or many not look exactly
the same as the graphics shown in this manual.
Note: The Intel RAID Confi guration Utility is only available for systems with two or
more drives installed. The Intel RAID Utility screen will not display in systems with
one drive installed.)
Due to each serverboard controlling two of the four SATA drives in the system, the
6015T-T/6015T-INF only supports RAID levels 0 and 1.