SUPER MICRO Computer SUPERSERVER 6015T-INF - Manual (Page 52)

5-16
S UPER S ERVER 6015T-T/6015T-INF User's Manual
Wake-On-Ring
The Wake-On-Ring header is designated
JWOR. This function allows your computer
to receive and be "awakened" by an incom-
ing call when in the suspend state. See the
table on the right for pin defi nitions. You
must also have a WOR card and cable to
use this feature.
Serial Ports
One serial port is included on the
serverboard: COM2 is a port located
beside the VGA port. See the table
on the right for pin defi nitions.
Wake-On-Ring
Pin Defi nitions
(JWOR)
Pin# Defi nition
1 Ground (Black)
2 Wake-up
Note: NC indicates no connection.
Serial Port Pin Defi nitions
(COM2)
Pin # Defi nition Pin # Defi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC
SGPIO Header
An SGPIO (Serial General Purpose
Input/Output) header is included on the
serverboard. This header is used to
communicate with the System Monitoring
chip on the backplane. SGPIO is used to
monitor SATA activity. See the table on
the right for pin defi nitions.
SGPIO Headers Pin Defi nitions
(SGPIO)
Pin# Defi nition Pin Defi nition
1 NC 2 *NC
3 Ground 4 DATA Out
5 Load 6 Ground
7 Clock 8 *NC