SUPER MICRO Computer SUPERSERVER 6015T-INF - Manual (Page 53)

Chapter 5: Advanced Serverboard Setup
5-17
SMB Power (I 2 C)
The header at JI 2 C is for I 2 C, which
may be used to monitor the status of
the power supply, fan and system tem-
perature. See the table on the right for
pin defi nitions.
SMB Power (I 2 C)
Pin Defi nitions (J17)
Pin# Defi nition
1 Clock
2 Data
3 Power Fail
4 Ground
5 +3.3V
SMB
A System Management Bus header
is located at J18. Connect the ap-
propriate cable here to utilize SMB on
your system.
SMB Header
Pin Defi nitions
Pin# Defi nition
1 Data
2 Ground
3 Clock
4 NC