SUPER MICRO Computer SUPERSERVER 6015T-INF - Manual (Page 70)

7-8
S UPER S ERVER 6015T-T/6015T-INF User's Manual
ACPI Mode
Use this setting to determine if you want to employ ACPI (Advanced Confi guration
and Power Interface) power management on your system. The options are
Yes and No.
Power Button Behavior
If set to Instant-Off, the system will power off immediately as soon as the user
hits the power button. If set to 4-sec., the system will power off when the user
presses the power button for 4 seconds or longer. The options are instant-off
and 4-sec override.
Resume On Modem Ring
Select On to “wake your system up” when an incoming call is received by your
modem. The options are On and Off.
Power Loss Control
The feature allows the user to set the power state after a power outage. You
can select Stay Off for the system power to remain off after a power loss. Select
Power On for the system power to be turned on after a power loss. Select Last
State to allow the system to resume its last state before the power loss.
Watch Dog
If enabled, this option will automatically reset the system if the system is not
active for more than 5 minutes. The options are Enabled and Disabled.
Summary Screen
This setting allows you to Enable or Disable the summary screen which displays
the system confi guration during bootup.
Memory Cache
Cache System BIOS Area
This setting allows you to designate a reserve area in the system memory to be
used as a System BIOS buffer to allow BIOS to write (cache) its data into it. Select
Write Protect to enable the function and reserve this area for system BIOS ROM
access only. Select Uncached to disable this function and make this area available
for other devices.
Cache Video BIOS Area
This setting allows you to designate a reserve area in the system memory to be
used as a Video BIOS buffer to allow BIOS to write (cache) its data into it. Select
Write Protect to enable the function and reserve this area for the Video BIOS ROM
access only. Select Uncached to disable this function.