SUPER MICRO Computer SUPERSERVER 6015T-INF - Manual (Page 50)

5-14
S UPER S ERVER 6015T-T/6015T-INF User's Manual
Chassis Intrusion
The Chassis Intrusion header is des-
ignated JL1. See the board layout for
the location of JL1 and the table on
the right for pin defi nitions.
Power On LED
The Power On LED connector is lo-
cated on pins 15 and 16 of JF1. This
connection is used to provide LED
indication of power being supplied to
the system. See the table on the right
for pin defi nitions.
Fan Headers
The X7DBT-T/X7DBT-INF has four
6-pin proprietary fan headers. Each
fan header supports two 3-pin fans.
See the table on the right for pin
defi nitions. Note: The onboard fan
speed is controlled by the CPU die
temperature.
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin defi nitions.
Power LED
Pin Defi nitions (JF1)
Pin# Defi nition
15 5V Stby
16 Control
NMI Button
Pin Defi nitions (JF1)
Pin# Defi nition
19 Control
20 Ground
Chassis Intrusion
Pin Defi nitions (JL1)
Pin# Defi nition
1 Intrusion Input
2 Ground
Fan Header Pin Defi nitions
(Fan1/2 - Fan7/8)
Pin # Defi nition Pin # Defi nition
1 PWR (DC
Speed CTRL) 4 Ground
2 Tachometer for
Fan 1/3/5 5 Tachometer for
Fan 2/4/6
3 Ground 6 PWR (DC
Speed CTRL)