SUPER MICRO Computer SUPERSERVER 6015T-INF - Manual (Page 60)

6-4
S UPER S ERVER 6015T-T/6015T-INF User's Manual
Figure 6-3. Mounting a Drive in a Carrier
2. Installing/removing hot-swap SATA drives
The drive carriers are all easily accessible at the front of the chassis. These are
(with RAID enabled) hot-swap drives. To remove a carrier, push the release button
located beside the drive LEDs. Then swing the handle fully out and use it to pull
the unit straight out (see Figure 6-4).
Figure 6-4. Removing a SATA Drive