SUPER MICRO Computer SUPERSERVER 6015T-INF - Manual (Page 15)

Chapter 1: Introduction
1-5
1-3 Server Chassis Features
The following is a general outline of the main features of the SC808T-980 1U chas-
sis. Details on the chassis can be found in Chapter 6.
System Power
When confi gured as a SuperServer 6015T-T/6015T-INF, the SC808T-980 includes
a single 980W cold-swap power supply, which provides the power to both server-
boards housed in the chassis.
SATA Subsystem
The SC808T-980 chassis was designed to support four SATA hard drives, which
are hot-swappable units.
Control Panel
The SC808T-980 features two independant control panels associated with each
serverboard in the chassis. Each control panel has LEDs to indicate power on,
network activity, hard disk drive activity and system overheat conditions. Each
control panel also includes a main power button and a system reset button.
Rear I/O Panel
The SC808T-980 is a 1U rackmount chassis. Its I/O panel provides a slots for two
low-profi le PCI-E x8 expansion cards, two COM ports, four USB ports, two VGA
ports and four Gb Ethernet ports. The 6015T-INF also provides two Infi niBand
ports. See Chapter 6 for details.
Cooling System
The SC808T-980 chassis has an innovative cooling design that features two sets
of triple (for a total of six) 4-cm high-performance fans. A fan speed control setting
in BIOS allows fan speed to be determined by system temperature.