Stanton SCS.3M - Manual (Page 38)

Configuring DaRouter
The Preset Section (Figure 4.47)
34
Figure 4.47
• Active Preset – tells you the currently selected preset.
This is a drop-down box that can be used to select any presets
that are either loaded by default, or have been manually
loaded by the user. For the SCS.3m with Traktor LE
functionality described in this manual, select “SCS.3m LE”
from the drop-down.
• Reload button – This button reloads the currently selected
preset.
• “?” button – Loads the help file associated with the
currently selected preset. It is always important to click this
button to learn about functionality with the currently loaded
preset.
The Device Section (Figure 4.48)
Figure 4.48
This section tells you what devices are connected and active.
When an SCS.3 controller is connected, you will see it “light
up” with a blue outline to let you know it is active. Also, you
will see the box underneath each connected device will tell
you its serial number. If you want to change the device order,
you can click the serial number drop-down box and swap
positions with any of the other devices.