Stanton SCS.3M - Manual (Page 49)

FX Mode
45
5.4.2 FX Mode
In Traktor LE, there are 3 built-in effects available to you, and a separate FX send on each channel
(FX 1 and 2). You enter FX mode by pressing the FX Preset button. It will light red to let you know the
channel is in FX mode. Let’s take a look at what the different controls do in FX mode.
FX E QQ E QQ FX
MASTER
SELECT EFFECT
FI
LTER
W
E
T / D
RY
EFFE
C
T
C
ONT
R
OL
FI
LTER
C
ONT
R
OL
SELECT EFFECT
FIL
TER
WE
T / DR
Y
EFFEC
T C
ONTR
OL
FIL
TER C
ONTR
OL
FX Select – This slider allows you to select which built-in Traktor
effect is being controlled. (Figure 5.11)
FX Wet Dry – This controls the Wet/Dry mix of the FX.
When turned up (wet), more of the effect is heard where as when
turned down (dry) only the original music is heard without the
effect.
FX Amount – This controls the parameter for the effect.
This will have a different outcome for each effect. For instance with
Delay this will control the length of the delay or echo.
Filter – The filter slider controls the filter frequency.
When turned all the way up the filter will remove the lower
frequencies (bass) and allow the high frequencies to pass (treble).
When turned down the high frequencies will be removed and the
low frequencies will be heard.
Figure 5.11
FX E QQ E QQ FX
MASTER
MIXER Section buttons in FX mode (Figure 5.12)
A – FX ON/OFF TEMP. Pressing this momentarily turns the FX on
and keeps them on as long as you HOLD the button.
B – FX ON/OFF TOGGLE. Toggles the FX On and Off.
C – KEY LOCK TOGGLE. Turns the key lock On or Off.
D – FILTER ON/OF TOGGLE. Turns the channel filter On and Off.
This works with slider 3, which controls the AMOUNT of filter.
Figure 5.12