Using the effects (fx), Figure 6.15, Figure 6.16 – Stanton SCS.3M User Manual
Page 58
Using the Effects (FX)
The second fader changes FX control. This will modify the main parameter for the effect.
For delay the parameter controls the length of the delay, shorter delays will create more of a stuttering
effect where as a long delay will create a sound more like a large room echo. Use the second slider to
play with the FX parameter. (Figure 6.15)
54
FX
E
E
FX
MASTER
Figure 6.15
Now you can play with the other effects in Traktor by
using the top slider.
In parallel to the FX 1 and FX 2 modules, there are also
dedicated filters for each deck in Traktor. The filter
control allows only certain frequencies to be passed
into the mix while other frequencies are removed
(or filtered). The filter control can be used either as an
effect for drastic changes to a song or as a tool when
mixing to remove certain parts of a song while mixing
it in.
The last fader in the group allows you to sweep the filter for the associated deck. To play with the
filter first make sure it is engaged by pressing the Filter On/Off button and then use the fader to filter
the sound. When the slider is set to center position, no effect is heard because neither hi frequencies
or low frequencies are being filtered out. (Figure 6.16)
FX
E
E
FX
MASTER
Figure 6.16