Stanton SCS.3M - Manual (Page 40)

Configuring Traktor LE
4.5 Configuring Traktor LE
Because Traktor LE comes bundled with the SCS.3m, it has support built-in and is easy to configure.
When you run Traktor LE for the first time, you should see the Setup Wizard open. It will look
something like this… (Figure 4.50)
36
Figure 4.50
If you run Traktor LE and do not see this window, you can run the Setup Wizard manually by going to
Help > Start Setup Wizard.
Now that we have the window open, you will have 2 options available – your setup and device.
For your setup, select Stanton. For the device, select SCS.3m LE. Once you have done that, click Apply.
The configuration should at this point automatically place the SCS.3m into a Traktor LE specific mode.
If the unit does not appear to function properly, please restart Traktor and check the troubleshooting
guide in this manual. It is possible that you will have to configure your audio interface for Traktor LE.
Please refer to the Appendix “Audio Interface Configuration.”
If you are using the SCS.3m with one or two SCS.3d’s, select “SCS.3 System” from the drop-down list.
Full system functionality is not described in this manual. Please consult the preset documentation in
DaRouter for System 3 functionality with all 3 components.