Stanton SCS.3M - Manual (Page 45)

Controller Overview
5.2 Controller Overview
The SCS.3m has two basic operational modes called EQ and FX modes. Therefore, when you press the
EQ or the FX button, the functionality of the sliders above them and the buttons located in the middle
of the mixer section will change accordingly.
The following graphic will help you to understand how the SCS.3m will work in each mode.
For example, if you press the EQ Mode button, you will be able to control the parameters listed in the
EQ callouts (Hi, Mid, Low frequencies, etc) or make the actions briefly described (Jog Scratch,
BPM Tap, etc). On the other hand, if you press the FX Mode button, you will be able to control the
FX Wet, FX Control, Filter Control, etc. (Figure 5.4).
41
MASTER MASTER
Figure 5.4