Stanton SCS.3M - Manual (Page 39)

Configuring DaRouter
35
The Activity Monitor (Figure 4.49)
Figure 4.49
The Activity Monitor lets you know what is happening with
DaRouter. There are 3 symbols here, an arrow, a square, and
another arrow. The first arrow lights up blue to let you know
when DaRouter is receiving MIDI data from your controllers.
The square lights up to let you know that DaRouter is
processing rules. The last arrow lets you know when DaRouter
is sending MIDI out to your application.
To configure DaRouter initially, make sure your SCS.3m is
connected, run it, and make sure that the Traktor LE preset
(SCS.3m LE) is selected. If you use another application, select
it from the Active Preset drop-down.
You are also able to manually load presets into DaRouter. Just take the preset file you have downloaded
and drag & dropping it on top of the DaRouter application so it is loaded as the active preset.
Important: if you want to know how the preset you have selected works, press the “?” button.