Siemens SICLOCK TC 400 - Manual (Page 117)

A-115 © Siemens AG 2007 All Rights Reserved
SICLOCK
® TC 400
Appendix
A
A.1 Directives and declarations
Notes on CE marking
The following applies for the product described in this documentation:
EMC directive
The devices fulfill the requirements for the EC directive ™89/336/EEC Electro-
magnetic Compatibility™, and are designed for the following fields of application
corresponding to the CE marking:
Declaration of conformity
The EC declaration of conformity and the corresponding documentation are made
available to authorities in accordance with the EC directives stated above. Your
sales representative can provide these on request.
Observing installation guidelines
The installation guidelines and safety instructions in this documentation must be
followed during commissioning and operation.
Connection of I/O devices
The requirements regarding noise immunity according to EN 61000-6-2:2001 are
met when you connect an I/O device suitable for an industrial environment. I/O
devices may only be connected via shielded cables.
Table A-1 Fields of application
Field of application Requirement for
Interference emission Immunity to interference
Industrial applications EN 61000-6-4: 2001 EN 61000-6-2: 2001