Siemens SICLOCK TC 400 - Manual (Page 99)

Parameter Table
10-97 © Siemens AG 2007 All Rights Reserved
SICLOCK
® TC 400
Further information
List of Symbols (Section C)
Authorization (Section 7.2.2)
0.08.03
Hardware Version A2B number Min:
Max:
Default: 0
4294967295
0
release number Min:
Max:
Default: 0
65535
0
serial number
1) The access symbols display the access possibility at the highest authorization level.
Table 10-1 List of the parameters of SICLOCK TC 400
Access 1)
/ No.
Parameter Entry Value Range / Default
Note
If the configuration tool is not authorized or operated with a low authorization level,
then not all parameters are displayed. This restriction affects, for example, set-
tings under "System".
The access rights also change with the authorization level.