Siemens SICLOCK TC 400 - Manual (Page 50)

Configuration Tool
7-48 © Siemens AG 2007 All Rights Reserved
SICLOCK ® TC 400
7.1 Menus
Table 7-1 Menus in the configuration tool
Menu/Function Meaning/Note
File
Open Load a parameterization/archive from the local file system
See also General functions (Section 7.2).
Save Save of a parameterization/archive to the local file system
See also General functions (Section 7.2).
Exit Exit the application
Connection See also Establish/disconnect online connection (Section 7.2.1).
Connect Connect to a device
Disconnect Disconnect from a device
Data transfer
(online connection required) See also Establish/disconnect online connection (Section 7.2.1).
Download parameters
from device Download all parameters from a connected device to the PC
See also Parameters (Section 7.3).
Refresh parameters
from device Refresh all parameters previously loaded to the PC with the values of
the connected device
See also Parameters (Section 7.3).
Upload parameters to
device Write all parameters from the PC to the connected device
See also Parameters (Section 7.3).
Download archive Download the entire archive from the connected device to the PC
See also Archive (Section 7.4).
Refresh archive Re-request/refresh the archive of a connected device
See also Archive (Section 7.4).
View
Parameters Change to the Parameters view
See also Parameters (Section 7.3).
Archive/Events Change to the Archive/Events view
See also Archive (Section 7.4).
Language Selection of the languages available for the user interface
Depending on the version, several languages may be offered for selec-
tion
• English (standard language)
• German
The language/naming of the parameters and archives is supplied by the
device. If the language set in the configuration tool is known to the
device, then the parameter/archive is displayed in this language. If the
language is not known to the device, the display is in the standard lan-
guage.