Smart Technologies LightRaise 40wi - Manual (Page 25)

Setting Use Notes
Gateway Displays the projector’s default
network gateway in values between
0.0.0.0 and 255.255.255.255.
DNS Displays the projector’s primary
domain name number in values
between 0.0.0.0 and 255.255.255.255.
MAC Address Displays the projector’s MAC address
in xx-xx-xx-xx-xx-xx format.
Group Name Displays the projector’s workgroup
name as set by an administrator
(maximum 12 characters). You can set the projector’s workgroup
name using the remote management
features (see Remotely managing
your interactive projector on page 53).
Projector Name Displays the projector’s name as set
by an administrator (maximum 12
characters). You can set the projector’s name
using the remote management
features (see Remotely managing
your interactive projector on page 53).
Location Displays the projector’s location as set
by an administrator (maximum 16
characters). You can set the projector’s location
using the remote management
features (see Remotely managing
your interactive projector on page 53).
Contact Displays the contact name or number
for projector support as set by an
administrator (maximum 16
characters). You can set the contact name or
number using the remote management
features (see Remotely managing
your interactive projector on page 53).
Language menu
Language Selects language preference. Projector menu support is available in
English (default), Chinese (Simplified),
Chinese (Traditional), Czech, Danish,
Dutch, Finnish, French, German,
Greek, Italian, Japanese, Korean,
Norwegian, Polish, Portuguese
(Brazil), Portuguese (Portugal),
Russian, Spanish and Swedish.
Information menu
Lamp Hours Displays the current number of lamp
usage hours from 0 to 4000 hours from
when it was last reset. Always reset the lamp hours after you
replace a lamp, because lamp service
reminders are based on the current
hours of use. See Resetting the lamp
hours on page 36 for details on the
lamp hours reset procedure.
Input Displays the current video input
source (VGA-1, VGA-2, Composite,
S-Video or HDMI).
C H A P T E R 3
Using your interactive projector
19