Smart Technologies LightRaise 40wi - Manual (Page 74)

Command Command target range Response
get micvolume [target] micvolume=[current] No
set micvolumecontrol[target] micvolumecontrol=[current] No
get micvolumecontrol micvolumecontrol=[current] No
set sysoutputsw[target] sysoutputsw =[current] No
get sysoutputsw sysoutputsw =[current] No
set micenable[target] micenable=[current] No
get micenable micenable=[current] No
set speakerenable[target] spkrenable=[current] No
get speakerenable spkrenable=[current] No
set micboostenable[target] micboostenable=[current] No
get micboostenable micboostenable=[current] No
Field Possible Values Description
target volume
l
+val
l
-val
l
=-20 to 20
The + or – symbol
increases or
decreases the
volume. If you type a
number between -20
and 20, the volume is
set to that level.
current volume -20 to 20 Sets the volume level
target mute
l
on
l
off
Turns the mute on or
off
current mute
l
on
l
off
Displays mute state
current volumecontrol
l
on
l
off
Displays volume
control
target volumecontrol
l
=on
l
=off
Displays if volume
control is on or off
current micvolume
l
0 to 40 Displays current
microphone volume
C H A P T E R 8
Connecting your room control system to your interactive projector
68