Smart Technologies LightRaise 40wi - Manual (Page 8)

Interactive projector
The features of your projector include the following:
l
Wall-mounted, projection engine that uses DLP®
technology by Texas Instruments™, providing
BrilliantColor™ performance and quality Gamma 2.2
correction with Bright Room, Dark Room, sRGB, User
and SMART Presentation modes.
l
Interactive features that allow you to use the pen as a mouse device and to write in digital ink
l
3D-ready using DLP Link™ technology
l
NTSC, NTSC 4.43, PAL, PAL-N, PAL-M and SECAM video system compatibility
l
WXGA 1280 × 800 display resolution
l
HD-ready, maximum resolution 720p pixel perfect, 1080i supported
l
16:10 and 16:9 selectable native aspect ratios with support for 4:5 and 4:3 ratios with scaling
l
2900:1 contrast ratio
l
102" (259.1 cm) diagonal maximum interactive area size on a blank wall
l
0.30:1 throw-ratio
l
Built-in speaker
l
Secure mounting and installation system that includes the following safety features:
o Optional projector padlock ring to prevent removal of the projector from the boom
o A safety tether
o Templates and instructions for positioning the system safely
Interactive pen
The interactive pen enables you to interact with your computer and write in digital ink. You can
perform a left-click by touching the pen nib to the projection surface. It has a left-click button that
enables you to use the pen from a short distance.
Remote control
The projector remote control enables you to access on-screen projector menus and to change
projector settings.
C H A P T E R 1
About your interactive projector
2