Smart Technologies LightRaise 40wi - Manual (Page 59)

Chapter 7: Remotely managing your
interactive projector
Accessing web page management 53
Home 54
Control panel 54
Control panel II 57
Network settings 57
E-mail alerts 59
Password settings 59
Simple Network Management Protocol (SNMP) 60
This chapter describes how to manage your interactive projector from a remote location.
Accessing web page management
Before you can access the remote management web page, you must connect a network cable to your
projector and enable the network functions in the on-screen display (OSD) menu (see Adjusting
projector settings on page 13).
N O T E
You can view the projector’s IP address by accessing the projector’s Network Settings menu (see
Network settings on page 57).
g To use the management web page
1. Start your Internet browser.
2. Type the projector’s network IP address in the address bar, and then press ENTER.
3. Select the menu options in the left pane to access the settings on each page.
4. Modify settings using your computer’s mouse and keyboard, and then click Submit or another
action button next to each setting you change.
Chapter 7
53