Sherbourn Technologies PT-7010A - Manual (Page 14)

14
Option 1
This shows independent 12 VDC outputs that will turn on
any compatible external amplifier with a 12 VDC trigger
input. Use the middle relay contacts to enable another
independent device that will turn on (as the contacts close)
whenever a “trigger enabled” input in the MAIN ZONE
has been selected. DO NOT use the center relay contacts
for 120 VAC or 240 VAC switching! They are only for
low voltage AC/DC loads of 2 A maximum. Typically this
will mean low voltage control of structured lighting
systems, automated window coverings, or other low
voltage devices. Never switch anything that plugs directly
into the wall with these on-board contacts. This action
will damage the unit and VOID THE WARRANTY.
Option 2
This simply shows looping the 12 VDC into the relay
contact to turn on a device using the available 12 VDC
trigger already supplied.