Sherbourn Technologies PT-7010A - Manual (Page 56)

56
Favorite Settings Log
You can use this section to log your favorite settings from various OSD menus and other preferences controlled by the
PT-7010A. This will come in handy if the unit is ever powered down for transport or in the event loss of power is
unintentional.
Tone Settings
You can reference the TONE SETTINGS on page 35 of
this manual.
Main Zone Settings
You can reference the MAIN ZONE and ZONE 2
SETTINGS on page 37 of this manual.
Zone 2 Settings
You can reference the MAIN ZONE and ZONE 2
SETTINGS on page 37 of this manual.
Mode Settings
You can reference the MODE SETTINGS for the signal
processing and decoding functions on page 35 of this
manual. Be sure to note any different settings between
Dolby Pro-Logic II and Dolby Pro-Logic llx modes where
applicable.
MAIN ZONE SETTINGS SELECTION
POWER UP SOURCE
POWER UP VOL. MODE
POWER UP VOL. LEVEL
MAX. VOLUME LEVEL
ZONE 2 SETTINGS SELECTION
ZONE 2 SYSTEM
BALANCE
POWER UP SOURCE
POWER UP VOL. MODE
POWER UP VOL. LEVEL
MAX. VOLUME LEVEL
MODE SETTINGS SELECTION
DYNAMIC RANGE
PL-II MODE
PL-II CENTER WIDTH II IIx
PL-II PANORAMA II IIx
PL-II DIMENSION II IIx
DTS LFE
DTS NEO:6
JAZZ CLUB AMBIENCE
TONE LEVEL (in dB)
BASS
TREBLE