Sherbourn Technologies PT-7010A - Manual (Page 5)

5
Safety Precautions
Read this Owner’s Guide thoroughly before attempting to
install and configure the Sherbourn PT-7010A Pre/Pro/Tuner.
All the safety and operation instructions should be read
before any operation of the component(s) begin. After
successful installation and configuration of the Sherbourn
PT-7010A Pre/Pro/Tuner, be sure to retain this manual in
a safe place for any future reference needs.
All warnings on the Sherbourn PT-7010A Pre/Pro/Tuner and
in these operating instructions should be followed. Safety is
a key component to a long lasting and trouble free installation.
The vast majority of the subsequent safety precautions involve
simple common sense. If you are not comfortable with the
installation of audio/video entertainment equipment, it will
be to your benefit to seek the services of a qualified
installation professional.
The Sherbourn PT-7010A Pre/Pro/Tuner should NEVER
be used near water such as a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, etc. The Sherbourn PT-7010A Pre/Pro/Tuner should
be situated so that its location or installation position does
not interfere with proper ventilation. The Sherbourn PT-7010A
Pre/Pro/Tuner should not be situated on a bed, sofa, rug, or
similar surface that may block any ventilation openings; or
placed in a built-in installation such as a bookcase, cabinet,
or closed equipment rack that may impede the flow of air
through ventilation openings. If installed in a closed
equipment rack for custom installations, be sure to add forced
air ventilation so that it has adequate air circulation.
The Sherbourn PT-7010A Pre/Pro/Tuner should be situated
away from heat sources such as radiators, or any other devices
which produce heat.
The Sherbourn PT-7010A Pre/Pro/Tuner should be connected
to a power supply only of the type described in this Owner’s
Guide and what is labeled on the PT-7010A component. Power
supply cords should be routed so that they are not in
high foot traffic areas or pinched by items placed upon
or against them, paying particular attention to cords at the
wall plugs, convenience receptacles, and the point where
they connect into the PT-7010A Pre/Pro/Tuner. The power
cord of the PT-7010A Pre/Pro/Tuner should be unplugged
from the outlet when unused for a long period of time.
When it’s time for cleaning the Sherbourn PT-7010A Pre/
Pro/Tuner, it should be cleaned only as recommended in
this Owner’s Guide. Never spray liquids directly into the
component’s vent openings. Care should be taken so that small
objects do not fall into the inside of the PT-7010A Pre/Pro/
Tuner.
The following situations require your Sherbourn PT-7010A
Pre/Pro/Tuner is serviced only by qualified service personnel:
1. The power-supply cord or the plug has been damaged; or
2. Objects have fallen, or liquid has spilled into the
component; or
3. The PT-7010A has been exposed to rain; or
4. The PT-7010A does not appear to operate normally
or exhibits a marked change in performance; or
5. The PT-7010A has been dropped, or its enclosure or
chassis is damaged.
The user should not attempt to service the PT-7010A Pre/
Pro/Tuner beyond the means described in this Owner’s Guide.
All other servicing should be referred to qualified service
personnel. To prevent electric shock, do not use this polarized
plug with an extension cord, receptacle or other outlet unless
the blades can be fully inserted to prevent blade exposure.
Pourpreevenir les chocs electriques ne pas utiliser cette fiche
polarises avec un prolongateur, un prise de courant ou une
autre sortie de courant, saufsi les lames peuvent titre inserees
a fond sans laisser aucune parllle a decouvert.
Grounding or Polarization — Precautions should be taken
so that the grounding or polarization means of the component
is not defeated.
This apparatus does not exceed the Class A/Class B
(whichever is applicable) limits for radio noise emissions from
digital apparatus as set out in the radio interference regulations
of the Canadian Department of Communications.
ATTENTION—Le present appareil numerique n’emetpas de
bruits radioelectriques depassant las limites applicables aux
appareils numeriques de class A/de class B (selon le cas)
prescrites dans le reglement sur le brouillage
radioelectrique edicts par les ministere des
communications du Canada.
For questions regarding service please contact the Sherbourn
Technical Support Department. To reach us by phone, please
call 978-663-9385 between the hours of 9 a.m. and 5 P.M.
EST. To reach us by the web at www.sherbourn.com, go
to the
Contact Us section and submit your technical
support issue.
WARNING - TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR EVITER LES CHOCS
ELECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.