Sherbourn Technologies PT-7010A - Manual (Page 34)

34
so do not move the remotes during this time. The remote
will flash “GOOD” if it has successfully learned all the
commands. If it flashes “FAIL,” then repeat this procedure.
6) Press MAIN to return to the main menu.
The On-Screen Display
(OSD) Functions
Video Connections
The On Screen Display (OSD) function is present at the
MAIN Composite Video, S-Video, or Component Video
outputs. It is also present at the output labeled VID2/
MON2, but only if it is set to MON2 in the programming
steps using the OSD. Make sure that your TV monitor’s
video input is connected correctly to one of these outputs.
OSD Activation
The OSD is activated using the remote’s MENU button
(with the remote set to operate the 7010A function). The
joystick pad and surrounding buttons allow you to navigate
through the OSD menus to control and customize many
features of the PT-7010A.
Press EXIT to quit the OSD at any time. Any changes you
make will be saved.
Note that the PT-7010A front panel display shows
abbreviated text when the OSD is activated.
Quick Access to Information
Pressing INFO at any time will bring up a short description
of the source you are listening to.
For example if you are listening to a DVD, the TV display
might show:
DVD DIGITAL 48K
DTS 5.1 / 5.1
What this means is that DVD is the selected input and the
signal type is DIGITAL. The sample rate of the signal is
48kHz and the decoding mode is registered as DTS mode,
5.1 is the input format, 5.1 is the output (i.e. five speakers
and a subwoofer).
OSD Menus
The first menu of the On Screen Display (OSD) has the
following items listed. TRIMS, MODES, TONE, INPUTS,
SETTINGS, and an EXIT option to quit programming.
Press MENU on the Sherbourn remote to bring up the first
OSD menu screen.
How to Navigate the OSD Menus
Select any one of the options using the joystick pad UP
and DOWN to navigate through the menu choices. Once
you make a choice, a FORWARD arrow after text on the
screen, shows there is more information on another page.
A BACK arrow shows that you can return to the previous
page. When applicable, a DOWN arrow, such as at the
bottom of the Inputs Menu, shows there is a second page
of similar choices. In these circumstances, the UP arrow
shows the way back to the first page.
NOTE: You can quit the OSD at any time by pressing EXIT
on the remote. Any changes you make will be saved. There
is no need to navigate back through previous pages, unless
you want to make more changes.
TRIM Menu
This menu allows you to adjust the individual volume level
of your speakers “on-the-fly.” Although careful calibration
is key to a good home theater, the Trims allow fine
adjustment of the current program playing. The Trims add
or subtract from the reference levels set during calibration
using the Speaker Calibration menu. Recalibrating will
reset these on-the-fly trims to zero.
Note: The Trim adjustments do not exceed +/-10 dB