Samsung iDCS 100 - Manual (Page 144)

31
2. Dial the station number (e.g., 205) OR [205] NO ANS FWD
press UP or DOWN key to select the 010 SEC
station and press the right soft key OR OR
press ANS/RLS to select all stations [ALL] NO ANS FWD
and press the right soft key 010 SEC
3. Press UP or DOWN key to select the [205] DTMF DUR.
station timer and press the right soft key 0100 MS→
4. Enter the new value via the dial pad, [205] DTMF DUR.
e.g., 0300 and the system will return 0100 MS→0300
to step 2
5. Press TRSF to store and exit
programming OR press SPK to store
and advance to the next program
ADDING NAMES TO THE
TRANSLATION TABLE
This program allows the system administrator or technician to associate a
CID or ANI number received from the Central Office with a name pro-
grammed in this translation table. If there is no match between a received
number and a name in this table, [no CID name] or [no ANI name] will be
displayed.
The translation table consists of 400 entries in the iDCS 500 system (1500
on L/LE version) or 350 entries in the iDCS 100 system with each entry com-
prised of a ten digit telephone number and a 16 digit name.
See Program
Station Names.
Open customer programming and follow the instructions below.
PROGRAM KEYS
UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next MMC.
HOLD - Used to clear previous entry.
ACTION DISPLAY
1. Press TRSF and then dial 728 TRANSLATION:(001)
Display shows first entry DIGIT:
2. Dial entry number (e.g., 005 or 0005) TRANSLATION:(005)
OR use UP and DOWN to scroll DIGIT:_
through entries and press right
soft key to select entry
3. Enter telephone number and press TRANSLATION:(005)
right soft key to advance to name entry DIGIT:3054264100
OR enter telephone number and press
left soft key to return to step 2 above
4. Enter the name using the method TRANSLATION:(005)
in Program Station Names SAMSUNG TELECOM
and press right or left soft key to
return to step 2 above
OR press SPK to save and advance
to next MMC OR press TRSF to
save and exit programming
DEFAULT DATA: NONE
32
HOME PAGE Table of Contents Guide-Contents