Samsung iDCS 100 - Manual (Page 86)

25
DIALING FEATURES
SPEED DIALING
You can dial a preprogrammed telephone number stored in the system-wide
speed dial list of numbers 500–999 or from your personal list of numbers
00–49:
• With the handset on-hook, press the SPD key or dial 16.
• Dial the desired speed dial number.
• The telephone number is automatically dialed for you.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPK or MONITOR key before you begin dialing.
PROGRAMMING PERSONAL SPEED
DIAL NUMBERS
You can program frequently dialed telephone numbers in a personal speed
dial list. A station may be assigned up to fifty numbers, 00–49. See your sys-
tem administrator to determine the amount assigned to your station.
• While on-hook, press TRSF and then dial 105.
• Dial a speed dial number (00–49).
• Dial a line or line group access code.
• Dial the telephone number to be stored (24 digits maximum). It can in-
clude #, 4, FLASH and PAUSE.
• Press TRSF to store the number.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPK or MONITOR key if you are using a 7B before you
begin dialing.
NETWORK FORWARDING
If you system is equipped with the iDCS 100 Enhanced Software, and your
system is networked with another system, there are 3 types of forwarding
that must be used when you want to forward calls to a station that is locat-
ed in another system on your network. These forwarding types are
described below.
CALL FORWARD UNCONDITIONAL
To forward all your calls to a station in another system on your network:
• Lift the handset and dial 608 plus the extension or group number.
• Receive confirmation tone and hang up.
To cancel Call Forward Unconditional, lift the handset and dial 600— —O OR R— —
dial another forward code, e.g., 604.
CALL FORWARD BUSY
To forward calls to a station in another system on your network when you
are on the phone:
• Lift the handset and dial 609 plus the extension or group number.
• Receive confirmation tone and hang up.
To cancel Call Forward Busy, lift the handset and dial 600— —O OR R— —dial anoth-
er forward code, e.g., 604.
CALL FORWARD NO RESPONSE
To forward calls to a station in another system on your network when you do
not answer:
• Lift the handset and dial 60* plus the extension or group number.
• Receive confirmation tone and hang up.
To cancel Call Forward No Response, lift the handset and dial 600— —O OR R— —
dial another forward code, e.g., 604.
24
A B C D E F
12 BUTTON KEYSET
PROGRAMMABLE KEYS LAYOUT
A B C D E F
24 BUTTON KEYSET
PROGRAMMABLE KEYS LAYOUT
HOME PAGE Table of Contents Guide-Contents