Manual retry with redial, Save number with redial, Chain dialing – Samsung iDCS 100 User Manual

Page 45: Automatic redial/retry, Pulse to tone changeover, Memo redialing

Advertising
background image

NOTES:
1.

If you make another call, auto-redial is canceled.

2.

To cancel a retry, lift and replace the handset.

PULSE TO TONE CHANGEOVER

When making an outside call on a dial pulse line, press #. All digits dialed
after the # with be sent as tones.

MEMO REDIALING

[iDCS 500 L/LE VERSION ONLY]

When you are calling directory information, you can store the number you
are given using the SAVE feature. There is no need for pencil and paper.

While you are talking on an outside call, press SAVE.

Dial the telephone number as it is dictated to you on the key pad.

Press SAVE to store the number.

To dial the number, press the SNR button. It will select the same line and dial
the stored number. If necessary, you can select a different line and then
press the SNR button.

31

MANUAL RETRY WITH REDIAL

[iDCS 500 L VERSION]

While you are on an outside call listening to a busy signal and you want to
redial the same number dialed.

Press the REDIAL key.

This will hang up your existing call and manually redial the same number
dialed. You can repeat this operation for a limited number of attempts.

SAVE NUMBER WITH REDIAL

To save the number you just dialed for later use, press the SNR key before
hanging up.

To redial this saved number at any time, press the SNR key or dial 17. The
same line will be selected for you.

NOTES:
1.

If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the SPEAKER key before you begin dialing.

2.

The saved telephone number is stored in memory until you save anoth-
er number.

3.

Redial does not apply to intercom calls.

CHAIN DIALING

You may manually dial additional digits following a speed dial number or
chain as many speed dial numbers together as required:

After the first speed number is dialed, press MEMORY again and dial
another speed number OR manually dial additional digits following a
speed dial number.

AUTOMATIC REDIAL/RETRY

When you are making an outside call and you receive a busy signal, the sys-
tem can automatically redial the number for you. It will automatically redial
at a pre-programmed interval for up to 15 attempts.

When you hear a busy signal, press the RETRY button.

The system will reserve the line and automatically redial the same num-
ber for you. You will hear the call being made through the keyset speak-
er. The microphone is muted.

When the called party answers, lift the handset or press the flashing
SPEAKER to begin speaking.

30

HOME PAGE

Table of Contents

Guide-Contents

Advertising