Sharp AR-207 User Manual
Page 20
18
MAKING COPIES
Normal copying
NORMAL COPYING
One-sided copies from two-sided originals
1
Ensure that no original is left on the original table.
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
●
5-1/2" x 8-1/2" size original cannot be used.
2
Use the ORIGINAL TO COPY key to select
.
●
When this mode is selected, the RSPF indicator will light up even if no
original has been set in the document feeder tray.
The image of every front side can be rotated 180° using
the image rotation feature. This feature is useful when
the originals and copies are in the landscape (horizontal)
orientation.
To set this feature, see page 22. This feature can also
be set using user program No. 20.
3
Set the number of copies and press the START key.
●
Press the CLEAR key to stop copying in the middle of a run.
●
Be sure not to touch the originals as they move on the reversing tray.
This may cause misfeeds.