Sharp AR-207 - Manual (Page 38)

36
SPECIAL FEA
TURES
Rotation copying
Original Paper
Copy
ROTATION COPYING
If user program No. 7 is set, the image of the original will rotate when the
orientation of the original does not match that of the copy paper. Rotation
copying will function only if the AUTO PAPER SELECT mode or AUTO
IMAGE mode has been selected. Even if user program No. 7 is not set,
rotation copying will function when the 2 in 1 or 4 in 1 function is selected.
See page 51. However, if enlargement copying onto a paper size larger than
8-1/2" x 11" is performed, the image cannot be rotated.
When this occurs, the detected size and orientation of the original will be
indicated by a steadily lighted indicator and a flashing indicator will show the
required orientation of the original. The original must be rotated 90° to match
the flashing indicator to prevent image loss on the copies.
Example: Copying from an 11" x 17" original
onto 8-1/2" x 11" paper