Sharp AR-207 - Manual (Page 70)

68
GENERAL INFORMA
TION
SPECIFICATIONS
Specifications
Weight Approx. 94.9 lbs. (43 kg)
Toner cartridge included
Copier dimensions 23-15/64" (W) x 20-29/32" (D) x 25-19/32" (H)
(590 mm (W) x 531 mm (D) x 650 mm (H))
Operating conditions Temperature: 59°F to 86°F (15°C to 30°C)
Humidity: 20% to 85%
Optional equipment 250-sheet paper feed unit (AR-DE5)
2x250-sheet paper feed unit (AR-DE6)
Facsimile expansion kit (AR-FX2)
Printer expansion kit (AR-PB8)
PS2 expansion kit (AR-PS1)
LCD panel kit (AR-PA1)
Job separator tray kit (AR-TR2)
Print server card (AR-NC3D)
REVERSING SINGLE PASS FEEDER
Acceptable Weight: 15 to 24 lbs.
originals Size: 5-1/2" x 8-1/2"* to 11" x 17"
Capacity: Up to 30 sheets provided the total aggregate
thickness does not exceed 5/32"
* 5-1/2" x 8-1/2" size original cannot be used in the duplex
mode.
Detectable original 5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14",
sizes 11" x 17"
First-copy time may differ depending on operating conditions, such as power-supply voltage and
room temperature.
As a part of our policy of continuous improvement, SHARP reserves the right
to make design and specification changes for product improvement without
prior notice. The performance specification figures indicated are nominal
values of production units. There may be some deviations from these values
in individual units.