Sharp AR-207 - Manual (Page 47)

45
ST
A
TUS
INDICA
T
ORS
Misfeed in the bypass tray
1 Gently pull the misfed paper out.
2 Lift slightly on the side cover and slide the cover out
until it stops. Close the side cover by pressing the
handle on the cover.
● The misfeed ( ) indicator will go out.
Misfeed in the copier
1 Open the bypass tray. Lift slightly on the side cover and
slide the cover out until it stops.
Location C
MISFEED REMOVAL
Misfeed removal
3 If the misfed original cannot be removed in steps 1 and
2, remove the misfed original from the exit area. Open
the document feeder cover and rotate the roller in the
direction indicated by the arrow if needed. If the misfed
original cannot be easily removed from the exit area,
open the front part of the document feeder tray to
remove the original. Pull out the reversing tray to remove
the misfed original.
After removing the misfed original from the exit area, be
sure to insert the reversing tray into the exit area until
it locks in place.
4 Open and close the document feeder cover to cancel the
misfeed location indicator.
After misfed originals are removed, a number may
appear in the copy quantity display, indicating the
number of originals that must be returned to the
document feeder tray. Return the originals and press
the START key to resume copying.
Roller