Sharp AR-207 - Manual (Page 25)

23
MAKING COPIES
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either automatically with
the AUTO IMAGE key or manually with the PRESET RATIO selector (
,
) keys and/or the zoom ( , ) keys. The zoom function enables precise
copy ratio selection from 50% to 200% in 1% increments.
Reduction/enlargement/zoom
Automatic
1 Place the original in the document feeder tray or on the
original table.
● The ORIGINAL SIZE indicator for the detected size will light up.
2 Use the TRAY SELECT key to select the paper tray with
the desired paper size.
● This feature will not work when copy paper of non-standard size is
used or the bypass tray is used.
3 Press the AUTO IMAGE key.
● The copy ratio will be automatically set.
● If a PRESET RATIO indicator is blinking, part of the original image
may not be copied.
● If user program No.7 is not set and the orientation of
the original does not correspond to standard
reduction/enlargement ratios for the selected paper
tray, the ORIGINAL SIZE indicator will blink. Change
the orientation of the original.
4 Set the number of copies.
5 Press the START key.
● To cancel the automatic reduction/enlargement
mode, press the AUTO IMAGE key again.
● When copying from the RSPF with this feature, the
automatic reduction/enlargement mode will be
automatically canceled after copying is complete.