Sharp AR-207 - Manual (Page 43)

41
SPECIAL FEA
TURES
MARGIN SHIFT
The MARGIN SHIFT feature automatically shifts the text or image to
increase the margin by approximately 1/4".
● The location of the margin to be increased can be selected to be either at
the left edge or the top of the page. To select the location, see step 2 below.
● This feature cannot be used with the 2 in 1 or 4 in 1 feature.
Expanded margin
Copy Original
A A
A
Left margin is expanded here.
Margin shift
1 Place the original in the document feeder tray or on the
original table.
● When copying from the original table and the margin is to be increased
on the left side, set the original face down so that the margin side is
positioned at the right side.
● If top is selected, set the margin to be expanded to the rear side of the
original table or the document feeder tray.
2 To confirm or set the location of the margin, press and
hold the MARGIN SHIFT key for approximately 5 seconds
until the MARGIN SHIFT indicator will blink.
● The currently selected number of the margin location will blink in the
copy quantity display.
1: Left
2: Top
Select the desired parameter using the numeric keys,
and press the START key.
● The selected parameter will be steadily lit.
Press the MARGIN SHIFT key.
● The MARGIN SHIFT indicator will stop blinking.
The location of the margin can be also set using user
program No. 22. See page 51.
3 Press the MARGIN SHIFT key and ensure that the desired
copy paper size is selected.
4 Set the number of copies and press the START key .