Sharp AR-207 User Manual
Page 30
28
MAKING COPIES
Copying in the sort mode
When copying in the sort mode, the original image will be stored in the copier
memory each time an original is scanned and copying will start after all
originals have been scanned.
1
Set the originals face up in the document feeder tray.
●
The original table cannot be used for sort copying.
2
Press the SORT/GROUP key to select the SORT mode.
3
Ensure that the desired copy paper size is selected.
4
Set the number of copies and press the START key.
●
Copying will start after the originals have been scanned. Up to 30
sheets of originals can be scanned. (If originals are fed continuously
using the stream feeding mode, up to approximately 60 sheets of
8-1/2" x 11" originals can be scanned. However, when copying
originals which require more memory such as photographs, the
number of originals which can be scanned will be less.) When the
memory becomes full of scanned original image data, the ORIGINAL
DATA indicator will blink.
When the ORIGINAL DATA indicator blinks, the copier will stop
scanning. To start copying of scanned originals, press the START key.
To cancel copying, press the CLEAR or CLEAR ALL key.
SORT/GROUP
Sort/group