Siemens 300 H - Manual (Page 44)

Step by Step
Telephone settings
44 44 44 44
Enabling the telephone again:
Press the key. The lamp lights up.
MN
Enter the service code.
or
Select and confirm.
Select and confirm.
and
S
Enter the PIN (code number).
Input is followed by the display:
"Executed".
Selecting the language for the user
prompts (displays)
Your HiPath 4000 or Hicom 300 E/H system can be con-
figured for up to five different languages. The first lan-
guage programmed is the default. If your telephone has
a "language" key, you can program a different language.
The period of time for which the other language remains
active is dependent on the language option which has
been configured. There are two possibilities:
•
Static language option
The language remains programmed until you
select a different language.
• Temporary language option
The language remains programmed until the end of
the next call, after which the system reverts to the
default language.
Selecting a language:
Press the key. The language selected appears on the
display for five seconds and is then set. Keep pressing
the key if you wish to select a different language.
Service Menu
PIN / COS?
Change COS?
Language
These Operating Instructions can be ordered in
other languages
Æ page 89.