Siemens 300 H - Manual (Page 47)

Storing numbers, system functions and timed reminders
47 47 47 47
Step by Step
S
Enter a specific speed dialling number (0 to 9).
If this digit has already been assigned a telephone num-
ber, this number is shown on the display.
Confirm.
S
Enter the number.
In the case of external numbers, enter the external code
and then the telephone number.
Confirm.
Saving a function on a key
Press the key. The lamp lights up.
K
Enter the service code.
or
Select and confirm.
and Press the programmable function key. Keyset-configu-
ration is displayed.
Confirm.
Select and confirm one of the system functions prompt-
ed.
Confirm.
New entry?
Save?
Service Menu
Key function?
Change?
New function:
Save?
Keys which have been preprogrammed by Sys-
tem Support cannot be changed. Then "Return?"
is shown.
You can now activate the function directly by
pressing the key. In the case of functions, such as
"second call", which can be alternately activated/
deactivated, you activate the function when you
press the key and subsequently deactivate it
when you press the key again. The key’s lamp is
lit when the function is active.