Siemens 300 H - Manual (Page 51)

Forwarding calls
51 51 51 51
Step by Step
Forwarding calls
Using call forwarding
You can program two types of call forwarding:
•
fixed forwarding, and
• variable forwarding
With fixed forwarding you can program a forwarding
destination that will remain valid until you change or de-
lete it. This forwarding function can be switched on and
off.
With variable forwarding you can choose between 6 dif-
ferent types of forwarding:
•
Variable forwarding (unconditional forwarding)
• Forwarding for internal
• Forwarding for external
• Forwarding for busy
• Forwarding after time
• Forwarding for busy/after timeout
Call forwarding is activated when a forwarding destina-
tion is programmed. When the variable forwarding func-
tion is switched off, the forwarding destination is auto-
matically deleted
When forwarding is activated you can see the following
display in the idle menu:
Fixed forwarding
If you have programmed a forwarding destination for
fixed forwarding, you can activate and deactivate the
forwarding facility either in the Service Menu or with a
Forwarding type Display message
Fixed forwarding
Variable forwarding
Forwarding to e.g. 222 Klaus
Meier (own number)
Forwarding for internal/
external Forwarding is on
Forwarding for busy No display message
Forwarding after time No display message
Forwarding for busy/af-
ter timeout No display message