Siemens 300 H - Manual (Page 77)

Making multi-line and team calls
77 77 77 77
Step by Step
Cancelling the fixed call forwarding
destination
Precondition: The telephone is in the idle state. A fixed
forwarding destination has been stored (
Æ page 76).
Only if it is not your primary line:
Press the line key for the required line.
Press the key. The lamp lights up.
The settings for fixed forwarding for every line are iden-
tical with the call forwarding function described above.
Therefore, for all further steps see
Æ page 53.
Deactivating call forwarding for a line
Precondition: The telephone is in the idle state. After a
line key has been pressed, an activated call forwarding
function is indicated on the display.
Only if it is not your primary line:
Press the line key for the required line.
With the "call forwarding" key:
Press the key. The lamp goes out.
Via the Service Menu:
Press the key. The lamp lights up.
IL
Enter the service code.
or
Select and confirm.
Select and confirm.
Confirm.
For further information see Æ page 53
Line
Service Menu
Line
Call forwarding
Service Menu
Switches?
Call forwarding?
Deactivate?