Siemens 300 H - Manual (Page 55)

Forwarding calls
55 55 55 55
Step by Step
Output on second line.
To select the next variable forwarding type.
Output on first line.
Output on second line.
or
To edit the current variable forwarding type.
Output on first line.
Output on second line.
Programming/changing the forwarding destination
Press the key. The lamp lights up.
Confirm.
Confirm. Display shows "Variable forwarding".
Confirm. Display shows "Fixed forwarding".
Confirm. Display shows "Forwarding for internal".
Open a forwarding type, for example, "Forwarding for in-
ternal".
S
Enter the number of the forwarding destination. Any
destination previously saved will be overwritten
Confirm when the complete number has been entered.
To select a different forwarding type, proceed as de-
scribed on
Æ page 54.
If variable forwarding was previously programmed and
activated, it is deactivated and the forwarding destina-
tion is deleted (for exception, see
Æ page 54). Fixed for-
warding is deactivated.
Deleting a forwarding destination
A variable forwarding destination is automatically delet-
ed when the forwarding type is switched off.
Activating variable forwarding
Variable forwarding is automatically activated when the
forwarding destination is programmed.
Next forwarding type? >
FWD-ALL-EXT off
Next forwarding type? >
FWD-ALL-INT off
Enter destination: >
Service Menu
Destinations?
Call forwarding?
Next forwarding type? >
Next forwarding type? >
Next forwarding type? >
Enter destination: >
Save?